AUTOMATIC PARTS WASHER AL3040

LIST PRICE $12,449.00

SALE PRICE $8,999.00

DESCRIPTION

Front load parts washers are ideal for heavy continuous usage. Parts washers save you time and money cleaning your parts in just minutes. It’s simple put your parts on the turntable, close the door and set the timer. Come back in a few minutes and your parts will be grease and oil free. Aqueous parts washers operate with hot water and biodegradable detergents. This eliminates the need for damaging solvents and aerosol cleaners. Model AL3040 features a 30” turntable and 40” working height capable of holding 1000 lbs.

SPECIFICATIONS

Solution Capacity 40 gal Turntable Load Limit 1000 lbs Pump Flow Rate at 22 psi 40 gpm Voltage 230 v
Phase 1
Motor Power 1 hp
Number of Jets 16

Pump Motor Type Cast Iron Vertical Sealless Pump

Electric Wash Heater Power 4.5 kw Construction 12 gauge Tank|12 gauge Door

and Cabinet Steel Plate

Hinged Door Sealless door with handle, latch and safety switch

Turntable Motor Type Gear Driven

Oil Skimmer Stainless Disc style Wash Timer 60 min

Turntable Diameter 30 in Working Height 40 in Overall Width 36 in Overall Height 60 in Overall Depth 34 in Weight 450 lbs

Add on Options:

6-5/8” cabinet vent w/flap plate . . . . . . . . . . . . . . . . . . . . . . . . $925.00

24 hour/7 day heater & skimmer timer . . . . . . . . . . . . . . . . . $1,179.00

230 Volt Single Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C 2 HP Pump Upgarade – 40 GPM @ 50 PSI. ………….. $1,444.00

Automatic Water Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,179.00

Stainless steel door, turntable, plumbing, parts tree & basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Request Price

CUSTOMER NOTES:

*CUSTOMER IS RESPONSIBLE FOR MAKING SURE THE CORRECT ELECTRICITY AND OR GAS IS AVAILABLE IN THE LOCATION THAT THE UNIT WILL BE INSTALLED.
*UNIT WILL NEED TO BE STACKED OUT OF THE BUILDING BY A LICENSED CONTRACTOR. IF YOU DO NOT HAVE A CONTRACTOR YOU WOULD LIKE TO USE PLEASE LET US KNOW SO WE CAN GET ONE TO COME OUT.. CUSTOMER WILL BE BILLED FOR COST OF CONTRACTOR.

*LEAD TIME IS 6-8 WEEKS FROM THE FACTORY

 


AUTOMATIC PARTS WASHER AL2735-RO

LIST PRICE $22,219.00

SALE PRICE $13,998.55

DESCRIPTION

Automatic parts washers – Alkota roll-out turntable parts washers are designed with you in mind. The roll-out turntable allows for ease of loading and unloading. For your convenience, the tank floors slope for easier cleanout. Simple 

operating controls, brass nozzles, and a gasket-free door is Alkota’s commitment to enhanced performance and productivity without a sacrifice in quality. The Alkota Parts Washers are built to last. Alkota constructed the cabinet and door with heavy-duty 12-gauge steel. All-around performance, durability and improved operator convenience make the RO parts washers the right choice for you. With all Alkota Parts Washers you no longer need solvent tanks that are known to be health hazards. RO parts washers allow you to load your parts, set the timer and get back to work saving you time and money. With the support of your local Alkota dealer we can find the correct solution for you. Model AL2735-RO features a 27” turntable and 25” working height capable of holding 500 lbs.

SPECIFICATIONS

Solution Capacity 94 gal
Turntable Load Limit 500 lbs Thermostat Switch Setting Temp 175 oF Pump Flow Rate at 50 psi 26 gpm Voltage 230/460 v
Phase 3
Motor Power 3 hp
Number of Nozzles 17

Pump Motor Type Cast Iron Vertical Sealless Pump

Electric Wash Heater Power 15 kw Construction 10 gauge Tank|12 gauge Door

and Cabinet Steel Plate

Hinged Door Sealless door with handle, latch and safety switch

Turntable Motor Type Gear Driven Features Intermediate Spray Bar Oil Skimmer Stainless Disc style Wash Timer 60 min

Turntable Diameter 27 in Working Height 25 in Overall Width 34 in Overall Height 67 in Overall Depth 48 in Weight 850 lbs

Add On Options:

6-5/8” cabinet vent w/flap plate . . . . . . . . . . . . . . . . . . . . . . . . . . . $925.00

24 hour/7 day heater & skimmer timer . . . . . . . . . . . . . . . . . . . . . $1,179.00

230 Volt Single Phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,179.00

Automatic Water Fill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,179.00

Tank Insulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,818.00

ntire Unit Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,439.00

2 1/2” casters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $848.00

CUSTOMER NOTES:

*CUSTOMER IS RESPONSIBLE FOR MAKING SURE THE CORRECT ELECTRICITY AND OR GAS IS AVAILABLE IN THE LOCATION THAT THE UNIT WILL BE INSTALLED.
*UNIT WILL NEED TO BE STACKED OUT OF THE BUILDING BY A LICENSED CONTRACTOR. IF YOU DO NOT HAVE A CONTRACTOR YOU WOULD LIKE TO USE PLEASE LET US KNOW SO WE CAN GET ONE TO COME OUT.. CUSTOMER WILL BE BILLED FOR COST OF CONTRACTOR.

*LEAD TIME IS 6-8 WEEKS FROM THE FACTORY